Over the past few years we have worked successfully on numerous projects. Some of them we would like to present here.


In the BMVI funded project GUW+ a controllable reversible DC substation has been developed which connects the existing infrastructure for the energy supply of light rails and trams with charging stations for electric buses. In addition, a battery storage unit by 2nd-Use automotive batteries of electric buses is installed in GUW+. This storage is used to avoid peak loads, temporarily store excess braking energy from trams or light rails and provide energy on demand.

In this project a GUW+ is implemented together with the Hannoversche Verkehrsbetriebe (ÜSTRA) in Hannover Döhren demonstrating and evaluating certain functionalities.

M&P provides systems for a compact charging infrastructure with isolated DC/DC-converters with output capacities of 75 kW and an output switching matrix to connect several charging points. To connect the battery storage, bidirectional step-up and step-down-converters will be provided further on. Additionally, M&P contributes to the development of a control-side information network within the GUW+ with gateway and device management in a central PLC.

The GUW+ project has received funding from the Federal Ministry of Transport and Digital Infrastructure (BMVI) within the funding program Electric Mobility. The program is coordinated by NOW GmbH and implemented by Project Management Jülich (PtJ).

For more information: 


In the BMBF-funded joint project EDDA-Bus (BMBF – German Federal Ministry for Education and Research) M&P was given responsibility for the development and production of charging stations for electric buses. The main objective was to provide a continuous rapid charging power of 250 kW from the AC-grid or DC-traction network (alternatively pulse charging of buffers with up to 700 kW peak power). M&P also delivered a sophisticated safety and automation concept for a rapid docking process of the vehicle.

For further information, please visit:

BYE Charging Station for light rail in China

The aim of this project was the development and production of a charging station for a catenary-free light rail in Guangzhou (China) by M&P and the related provision of an average system output of 620 kW from the AC mains with a supercapacitor buffer. It can achieve a peak output of up to 1.62 MW. In addition, M&P has developed a safety and automation concept for the charging process with two vehicles.

The AutoTram® Extra Grand

In this project funded by the BMBF (Federal Ministry of Education and Research) M&P took the challenge of the Development and production of all required power electronic components for the AutoTram® Extra Grand, the world’s longest hybrid bus. M&P also provided the software for the central control unit, which, inter alia, guarantees the energy management of the different storage systems and the monitoring of a variety of control units.

For detailed information, please visit:

SchIBZ – integrated hybrid fuel cell system for seagoing ships

In this BMVI-funded joint project M&P is responsible for the development and production of all power electronic components and development of the main control system for connecting a hybrid fuel cell system with the electrical power supply of a seagoing ship. A SCAP storage system for buffering power peaks were installed by M&P. The connection of the fuel cells had been ensured by an isolated DC/DC-Converter.

For detailed information, please visit:

Rail Brake Drive and Control System 2 (RDCS 2)

The Rail Brake Drive and Control System 2 (RDCS 2) is an electric drive system for operating electrodynamic rail brakes in Marshalling systems. By providing the peak power of the electrodynamic rail brakes (simultaneously up to 4 x 400 kW) via a high-performance energy storage, the power consumption from the mains can be reduced to a maximum of 80 kVA. Because of the very low power consumption and the small required power input significant cost savings in the energy supply are given.

The power electronics of the RDCS are designed with multiple redundancies from the infeed to the power provision and thus achieved a high level of availability. In the event of a mains failure the buffer serves as a USV to ensure a safe emergency shut-down. The RDCS 2 is almost maintenance-free and reaches the safety level 1 (SIL 1). Due to the high availability and very low maintenance the costs throughout the life cycle of the plant (LCC) are very low.

For detailed information, please visit:

Contact form

For questions, suggestions or project inquiries please use our contact form. We get in contact with you as soon as possible.


Telefon: +49 351 323305-10
Fax: +49 351 323305-19


M&P Motion Control and Power Electronics GmbH
Bismarckstraße 56
01257 Dresden